www.kriskate.com

In order to print the ring sizer above, make sure that your printer is set to 100%. Make sure that you have not reduced the print size in your printer 'page setup' area. You can verify that the sizer printed correctly by measuring it with a ruler; it should measure from A to B: 3 1/2 inches long.

Once you have printed the sizer, follow these directions to find your ring size:

• Cut out the ring sizer
• Cut a slit for Slot "A"
• With the numbers facing out, wrap the sizer around the finger where the ring will be worn.
• Pull the pointed end Tab "B" through Slot "A" until the sizer is snug, making sure to allow size for the knuckle.
• The number aligned with Slot "B" is your ring size.
• If the measure lands between two numbers your size is a half size Ex: Between 5 and 6 ring size: 5.5.